To assess the practical implications of various bottle materials used in anion exchange (IX) or granular activated carbon (GAC) isotherm experiments, adsorption of seven per- and polyfluoroalkyl substances (PFAS) onto three common bottle materials (silanized glass, polypropylene, and high-density polyethylene [HDPE]) were screened. Results were similar between bottle materials; therefore, only HDPE was used in a detailed bottle material isotherm study with 11 PFAS. For each PFAS, an HDPE bottle isotherm was generated with equilibrium liquid phase concentrations relevant to drinking water (<2000 ng/L). Percent PFAS recoveries between 90% and 103%, 85% and 114%, and 54% and 108% were determined for perfluoro-2-propoxypropanoic acid (GenX), five perfluoroalkyl carboxylic acids, and five perfluoroalkyl sulfonic acids (PFSA), respectively. These results indicated only the five PFSA adsorbed to the HDPE bottles in a concentration-dependent manner. Furthermore, linear isomer versions of two PFSA exhibited greater adsorption. For each PFSA studied, a linear isotherm was generated and used to develop guidance for conducting future IX and GAC isotherm studies. Specifically, the minimum initial isotherm concentration was established such that a maximum 1% loss would be expected to the HDPE bottles, resulting in required initial concentrations of the five PFSA between 21 and 75 times that of the design isotherm liquid equilibrium concentration.
Keywords: PFAS; adsorption; bottle materials; drinking water; isotherm.